Queen bed rug size

8×10 under the lower two-thirds. 24 in of rug each side and past the foot.

  1. 1 Room size
  2. 2 Nightstands + door
  3. 3 Size + diagram. Live, no button needed

Room in feet. Nightstand + door in inches.

Your size

…

…

Tape check · 15 min before ordering

  1. …
  2. Walk around it. Open the door fully. The rug must not catch.
  3. Sit on each side of the bed. Both feet should land on rug.
  4. Live with the tape 24 hours, then order.
Budget options

    Queen bed rug size rules

    • Anchor: rug under lower two-thirds of the 60×80 queen.
    • Border: ~24 in each side + foot; 12–18 in bare floor to walls (8–12 in OK in small rooms).
    • When torn between sizes, go bigger, unless your walkway or door says otherwise. If so, we'll tell you and suggest one that fits.
    • Pad: 1 in shorter per side than the rug (8×10 rug → 7′10″×9′10″ pad).

    Queen bed rug size FAQs

    What size rug for a queen bed?

    8×10 placed under the lower two-thirds of the bed, with about 24 inches of rug each side and past the foot. 6×9 works as a tight-budget fit. Two runners (2×7 each side) are the cheapest alternative.

    Should the rug go under the nightstands?

    Either works if you decide once: leave nightstands off the rug for small rooms, or run the rug under them for a grounded wall. Our tool computes both and never suggests a size that would block a walkway or door.

    How do I check before buying?

    Tape the exact outline on the floor (15-minute check): walk around it, open the door fully, and sit on each side. Both feet should land on rug. Live with the tape 24 hours, then order.

    Guideline tool. Always tape the outline and measure before you buy. rugsizeguide.com