King bed rug size

9×12 grounds the whole wall. 22–28 in of rug each side, nightstands on or off.

  1. 1 Room size
  2. 2 Nightstands + door
  3. 3 Size + diagram. Live, no button needed

Room in feet. Nightstand + door in inches.

Your size

…

…

Tape check · 15 min before ordering

  1. …
  2. Walk around it. Open the door fully. The rug must not catch.
  3. Sit on each side of the bed. Both feet should land on rug.
  4. Live with the tape 24 hours, then order.
Budget options

    King bed rug size rules

    • Anchor: 9×12 grounds king + nightstands + foot bench in masters.
    • Border: 22–28 in sides, 24 in past foot; 30 in walkway to closet/bath.
    • When torn between sizes, go bigger, unless the room won't allow it. Then we recommend a size that fits.
    • Pad: 1 in shorter per side (9×12 rug → 8′10″×11′10″ pad).

    King bed rug size FAQs

    What size rug for a king bed?

    9×12 is the standard under a king (76×80), leaving 22–28 inches of rug per side. 8×10 works as a tight-budget fit. 10×14 grounds the whole wall in large rooms.

    Full nightstands on the rug or off?

    Both work: run the rug under all the nightstands (usually 9×12 minimum), or keep nightstands off it in smaller rooms. The calculator above handles both.

    How do I avoid the expensive mistake?

    When torn between sizes, go bigger, but never at the cost of a walkway or door swing. Tape the 9×12 outline, open every door, check 24–30 in of walkway, then order.

    Guideline tool. Always tape the outline and measure before you buy. rugsizeguide.com